Joy Sign

So last year I made a Joy sign for the front porch by cutting out letters with the cricut using the Winnie The Pooh cartridge.  I mod podged the letters on but after being outside for the Christmas season it didn't hold up very well.  The letters started to peel off.

So I took the board and gave the back side a fresh coat of white paint. Cut out  new letters and used adhesive spray to attach then spray painted the board red.  If I had vinyl I would use that instead.  I'm sure that would have less bleed through under the letters.  Mine did bleed through some so I went back and touched up the white paint.

After the paint was dry I placed in on the front porch.

Linked up with:

Tatortots & Jello Link Party Palooza